| Model | Lead-Free Dual Wave Soldering Machine HR-S1825M |
| Configuration | Touchscreen Control Two-Stage Hot Air Heating Dual Wave Peaks Automatic Titanium Claw Cleaning, Electric In-and-Out of Solder Pot Spray Oscillation: Stepper Motor |
| Number of Wave Peaks | 2 Wave Peaks |
| Maximum Board Width | Max 250mm |
| Solder Pot Capacity | 200KG |
| Preheating Length | 800mm (Two Stages) |
| Wave Peak Height | 12mm |
| Component Lead Length on Board | 10mm |
| PCB Transportation Height | 750±20mm |
| Total Power | 11KW |
| Power Supply | 3-Phase 5-Wire System, 380V 50HZ |
| Control Method | Touchscreen |
| Rack Dimensions | 1800×1200×1500mm |
| Overall Dimensions | 2600×1200×1600mm |
| PCB Transportation Speed | 0-1.8 m/min |
| Preheating Zone Temperature | Room Temperature - 180°C |
| Heating Method | 100% Hot Air |
| Cooling Method | Axial Fan Cooling |
| Solder Pot Temperature | Room Temperature - 300°C |
| Transportation Direction | Left → Right |
| Temperature Control Method | PID + SSR |
| Overall Machine Control Method | Mitsubishi PLC + Touchscreen |
| Flux Capacity | Max 5.2L |
| Spraying Method | Stepper Motor + ST-6 |
| Air Supply | 4-7KG/cm², 12.5L/Min |
| Weight | 800KG |
| PCB Requirements | - |
| Maximum Component Height on PCB | 90mm |
| Maximum Component Lead Length Under PCB | 10mm |
| PCB Transportation Direction | Standard: Left → Right |
| Flux Spraying Components | - |
| Spray Nozzle | Adopts ST-6; Spray range: 20-65mm adjustable fan; Nozzle height: 50-200mm adjustable; Maximum flow rate: 60ml/min |
| Air Circuit System | Adopts imported filters, control valves and pipe joints |
| Spray Nozzle Movement System | Stepper motor, intelligently controlled by Mitsubishi PLC, enabling selective spraying |
| Nozzle Movement Mode | Precision stepper motor + slide rail |
| Flux Filtration and Recovery System | Air Extraction System: Stainless steel wire mesh filtration; Maximizes filtration and recovery of excess flux by utilizing fluid properties |
| Preheating Components | - |
| Extended Preheating Zone | 2-stage hot air preheating, total length 800mm, independent temperature control |
| Temperature Control | PID Control |
| Heating Components | High-temperature hot air motor, Taiwan Taizhan high-temperature ceramic heating tube |
| Installation Mode | Drawer-type modular design for heating tubes, facilitating maintenance and servicing |
| Solder Pot Components | - |
| Temperature Range | Room Temperature - 300°C |
| Solder Pot Movement Mode | Automatic |
| Distance Between 1st and 2nd Wave Peaks | 20-30mm |
| 1st Wave Peak Nozzle | Standard shock wave, for soldering SMD components and double-sided pad components |
| 2nd Wave Peak Nozzle | Standard laminar wave |
| Low Oxidation Design | Under normal circumstances: Lead-containing solder dross ≤ 2kg/8h; Lead-free solder dross ≤ 1.5kg/8h; Solder dross may vary depending on impurity content in solder bars |
| Economical Operation | Controls the board-in spray and wave-start functions via PLC and photoelectric switch, reducing unnecessary waste |
| Wave Peak Motor | Taiwan TCG high-temperature motor; Digital adjustment of wave peak height |
| Heating Components | Customized long-life hot air heating device, Taiwan ANV solid-state relay; Solder liquid heating accuracy ±2°C |
| Refrigeration System (Standard Configuration) | Forced cooling with axial fan |
| PCB Conveyance System | - |
| High-Strength Wear-Resistant Guide Rails | Special aluminum guide rails (high-temperature resistant and wear-resistant); Stainless steel guide rails with special thermal compensation anti-deformation telescopic structure to ensure no deformation or board dropping |
| Guide Rail Parallelism | 0.5mm |
| Width Adjustment | Manual width adjustment |
| Chain Claws | Double-hook needle claw clamping plate, standard ≤ 2.5mm |
| Claw Cleaning Device | Automatic needle claw cleaning device |
| Minimum Unit Range for Conveyance Speed Setting | Minimum unit 1mm/min, range 0-2200mm/min |
| Conveyance Speed Deviation Range | Electronic closed-loop control, within 0-10mm/min |
| Chain Tensioning Device | Sprocket-adjusted tensioning |
| Conveyance Motor | Taiwan TCG 90W motor, equipped with overload limiter protection device |
| Machine Body Structure | - |
| Machine Body Structure | Streamlined frame structure, aesthetic design, sturdy and durable |
| Front and Rear Door Structure | Fully enclosed structure, providing maximum maintenance space |
| Electrical and Control Performance | - |
| Control Method | Mitsubishi PLC + Touchscreen |
| Control Interface | Simple and intuitive operation, stable performance |
| Abnormal Alarm Content | High or low temperature alarm |
| Temperature Control Protection System | Stops heating when preheating or solder pot malfunctions |
